Contributed by:
• The first law of thermodynamics
• Thermodynamic processes
• Thermodynamic processes for an ideal gas
• Reversible and irreversible processes
• Entropy - the second law of thermodynamics
• Statistical interpretation of entropy
• The third law of thermodynamics
2.
Chapter 15: Thermodynamics
• The first law of thermodynamics
• Thermodynamic processes
• Thermodynamic processes for an ideal gas
• Reversible and irreversible processes
• Entropy - the second law of thermodynamics
• Statistical interpretation of entropy
• The third law of thermodynamics
MFMcGraw Chap15d-Thermo-Revised 5/5/10 2
3.
Thermodynamics
Thermodynamics is the study of the inter-relation between
heat, work and internal energy of a system and its interaction
with its environment..
Example systems System
• Gas in a container Environment
• Magnetization and
demagnetization
• Charging & discharging a
Universe
battery
• Chemical reactions
• Thermocouple operation
MFMcGraw Chap15d-Thermo-Revised 5/5/10 3
4.
Thermodynamics States
A state variable describes the state of a system at time
t, but it does not reveal how the system was put into
that state.
Examples of state variables:
• P = pressure (Pa or N/m2),
• T = temperature (K),
• V = volume (m3),
• n = number of moles, and
• U = internal energy (J).
MFMcGraw Chap15d-Thermo-Revised 5/5/10 4
5.
The First Law of Thermodynamics
The first law of thermodynamics says the change in
internal energy of a system is equal to the heat flow
into the system plus the work done on the system
(conservation of energy).
U Q W
MFMcGraw Chap15d-Thermo-Revised 5/5/10 5
6.
Sign Conventions
MFMcGraw Chap15d-Thermo-Revised 5/5/10 6
7.
Sign Conventions - Other Physics Texts
“In some chemistry and engineering books, the first law of
thermodynamics is written as Q = ΔU -W’. The equations are
the same but have a different emphasis. In this expression W’
means the work done by the environment on the system and is
thus the negative of our work W, or W = -W’.
The first law was discovered by researchers interested in
building heat engines. Their emphasis was on finding the work
done by the system, W, not W’.
Since we want to understand heat engines, the historical
definition is adopted. W means the work done by the system.”
-College Physics, Wilson, Buffa & Lou, 6th ed., p. 400.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 7
8.
Sign Conventions - Giambattista
Our
Ourbook
bookuses
usesΔUΔU==QQ+W’
+W’ (a
(arearrangement
rearrangementof
ofthe
the
previous
previousslide)
slide)
W’
W’<<00for
forthe
thesystem
systemdoing
doingwork
workon
onthe
theenvironment.
environment.
W’
W’>>00for
forthe
theenvironment
environmentdoing
doingwork
workon
onthe
thesystem.
system.
QQisisthe
theinput
inputenergy.
energy. IfIfW’
W’isisnegative
negativethen
thenthat
thatamount
amountofof
energy
energyisisnot
notavailable
availableto toraise
raisethe
theinternal
internalenergy
energyof
ofthe
the
system.
system.
Our
Ourfocus
focusisisthe
theenergy
energyin
inthe
theideal
idealgas
gassystem.
system.Doing
Doingwork
work
on
onthe
theenvironment
environmentremoves
removesenergy
energyfrom
fromour
oursystem.
system.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 8
9.
Thermodynamic Processes
A thermodynamic process is represented by a change in
one or more of the thermodynamic variables describing
the system.
Each point on the curve
represents an equilibrium state
of the system.
Our equation of state, the ideal
gas law (PV = nRT), only
describes the system when it is
in a state of thermal equilibrium.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 9
10.
Reversible Thermodynamic Process
For a process to be reversible each point on the curve
must represent an equilibrium state of the system.
The ideal gas law
(PV = nRT), does
Reversible Process
not describe the
system when it is
not in a state of
thermal
equilibrium.
Irreversible Process
MFMcGraw Chap15d-Thermo-Revised 5/5/10 10
11.
Thermodynamic Processes
A PV diagram can be used to represent the state changes of a
system, provided the system is always near equilibrium.
The area under a PV curve
gives the magnitude of the
work done on a system. W>0
for compression and W<0 for
MFMcGraw Chap15d-Thermo-Revised 5/5/10 11
12.
To go from the state (Vi, Pi) by the path (a) to the state (Vf, Pf)
requires a different amount of work then by path (b). To return to
the initial point (1) requires the work to be nonzero.
The work done on a system depends on the path taken in the PV
diagram. The work done on a system during a closed cycle can
be nonzero.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 12
13.
An isothermal process
implies that both P and V
of the gas change
(PVT).
MFMcGraw Chap15d-Thermo-Revised 5/5/10 13
14.
Summary of Thermodynamic Processes
MFMcGraw Chap15d-Thermo-Revised 5/5/10 14
15.
Summary of Thermal Processes
The First Law of Thermodynamics
U Q W
W = -P(Vf - Vi)
V V
W = nRT ln i + nRT ln i
V Vf
f
3
+ nR ( Tf - Ti )
2
MFMcGraw Chap15d-Thermo-Revised 5/5/10 15
16.
Thermodynamic Processes for an Ideal Gas
No work is done on a system when
its volume remains constant
(isochoric process). For an ideal
gas (provided the number of moles
remains constant), the change in
internal energy is
Q U nCV T .
MFMcGraw Chap15d-Thermo-Revised 5/5/10 16
17.
For a constant pressure (isobaric) process, the change in internal
energy is
U Q W
where W PV nRT and Q nC P T .
CP is the molar specific heat at constant
pressure. For an ideal gas CP = CV + R.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 17
18.
For a constant temperature (isothermal) process, U = 0 and the
work done on an ideal gas is
Vi
W nRT ln .
Vf
MFMcGraw Chap15d-Thermo-Revised 5/5/10 18
19.
Example (text problem 15.7): An ideal monatomic gas is taken
through a cycle in the PV diagram.
(a) If there are 0.0200 mol of this gas, what are the temperature
and pressure at point C?
From the graph: Pc
= 98.0 kPa
Using the ideal gas law
PcVc
Tc 1180 K.
nR
MFMcGraw Chap15d-Thermo-Revised 5/5/10 19
20.
Example continued:
(b) What is the change in internal energy of the gas as it is
taken from point A to B?
This is an isochoric process so W = 0 and U = Q.
3 PBVB PAVA
U Q nCV T n R
2 nR nR
3
PBVB PAVA
2
3
V PB PA 200 J
2
MFMcGraw Chap15d-Thermo-Revised 5/5/10 20
21.
Example continued:
(c) How much work is done by this gas per cycle?
The work done per cycle is the area between the curves on the
PV diagram. Here W=½VP = 66 J.
(d) What is the total change in internal energy of this gas in
one cycle?
3 Pf Vf PiVi
U nCV T n R
2 nR nR
3
Pf Vf PiVi 0 The cycle ends where it
2 began (T = 0).
MFMcGraw Chap15d-Thermo-Revised 5/5/10 21
22.
Example (text problem 15.8):
An ideal gas is in contact with a heat reservoir so that it remains at
constant temperature of 300.0 K. The gas is compressed from a
volume of 24.0 L to a volume of 14.0 L. During the process, the
mechanical device pushing the piston to compress the gas is found
to expend 5.00 kJ of energy.
How much heat flows between the heat reservoir and the gas, and
in what direction does the heat flow occur?
This is an isothermal process, so U = Q + W = 0 (for an
ideal gas) and W = Q = 5.00 kJ. Heat flows from the gas to
the reservoir.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 22
23.
First Law of Thermodynamics
Internal Energy
ΔU = Q + W (Conservation of Energy)
Heat Energy Work Done
MFMcGraw Chap15d-Thermo-Revised 5/5/10 23
24.
Isothermal Process
W = -Q
MFMcGraw Chap15d-Thermo-Revised 5/5/10 24
25.
Isobaric Process
W = -p(V2 - V1)
MFMcGraw Chap15d-Thermo-Revised 5/5/10 25
26.
Isometric Process
MFMcGraw Chap15d-Thermo-Revised 5/5/10 26
27.
Adiabatic Process
W = ΔU
MFMcGraw Chap15d-Thermo-Revised 5/5/10 27
28.
Reversible and Irreversible Processes
A process is reversible if it does not violate any law of
physics when it is run backwards in time.
For example an ice cube placed on a countertop in a warm
room will melt.
The reverse process cannot occur: an ice cube will not form
out of the puddle of water on the countertop in a warm room.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 28
29.
Reversible and Irreversible Processes
A collision between two billiard balls is reversible.
Momentum is conserved if time is run forward; momentum
is still conserved if time runs backwards.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 29
30.
The Second Law of Thermodynamics
The second law of thermodynamics (Clausius Statement): Heat
never flows spontaneously from a colder body to a hotter body.
Any process that involves dissipation of energy is not
reversible.
Any process that involves heat transfer from a hotter object
to a colder object is not reversible.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 30
31.
Entropy
Entropy is a state variable and is not a conserved
quantity.
Entropy is a measure of a system’s disorder.
Heat flows from objects of high temperature to objects at
low temperature because this process increases the
disorder of the system.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 31
32.
Entropy
If an amount of heat Q flows into a system at constant
temperature, then the change in entropy is
Q
S .
T
Every irreversible process increases the total entropy of the
universe. Reversible processes do not increase the total
entropy of the universe.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 32
33.
The Second Law of Thermodynamics
(Entropy Statement)
The entropy of the universe never decreases.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 33
34.
Example (text problem 15.48):
An ice cube at 0.0 C is slowly melting.
What is the change in the ice cube’s entropy for each 1.00 g of ice
that melts?
To melt ice requires Q = mLf joules of heat. To melt one gram
of ice requires 333.7 J of energy.
Q 333.7 J
The entropy change is S 1.22 J/K.
T 273 K
MFMcGraw Chap15d-Thermo-Revised 5/5/10 34
35.
Statistical Interpretation of Entropy
A microstate specifies the state of each constituent
particle in a thermodynamic system.
A macrostate is determined by the values of the
thermodynamic state variables.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 35
36.
number of microstate s corresponding to the macrostate
probabilit y of a macrostate
total number of microstate s for all possible macrostate s
MFMcGraw Chap15d-Thermo-Revised 5/5/10 36
37.
The number of microstates for a given macrostate is
related to the entropy.
S k ln
where is the number of microstates.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 37
38.
Example (text problem 15.61):
For a system composed of two identical dice, let the
macrostate be defined as the sum of the numbers showing
on the top faces.
What is the maximum entropy of this system in units of
Boltzmann’s constant?
MFMcGraw Chap15d-Thermo-Revised 5/5/10 38
39.
Example continued:
Sum Possible microstates
2 (1,1)
3 (1,2); (2,1)
4 (1,3); (2,2); (3,1)
5 (1,4); (2,3); (3,2); (4,1)
6 (1,5); (2,4), (3,3); (4,2); (5,1)
7 (1,6); (2,5); (3,4), (4,3); (5,2); (6,1)
8 (2,6); (3,5); (4,4) (5,3); (6,2)
9 (3,6); (4,5); (5,4) (6,3)
10 (4,6); (5,5); (6,4)
11 (5,6); (6,5)
12 (6,6)
MFMcGraw Chap15d-Thermo-Revised 5/5/10 39
40.
Example continued:
The maximum entropy corresponds to a sum of 7 on the dice.
For this macrostate, Ω = 6 with an entropy of
S k ln k ln 6 1.79k .
MFMcGraw Chap15d-Thermo-Revised 5/5/10 40
41.
The Disappearing Entropy Simulation
http://mats.gmd.de/~skaley/vpa/entropy/entropy.html
MFMcGraw Chap15d-Thermo-Revised 5/5/10 41
42.
http://ww2.lafayette.edu/~physics/files/phys133/entropy.html
MFMcGraw Chap15d-Thermo-Revised 5/5/10 42
43.
The number of microstates for a given macrostate is
related to the entropy.
S k ln
where is the number of microstates.
=(n1 + n2)!/(n1! x n2!)
n1 is the number of balls in the box on the left.
n2 is the number of balls in the box on the right.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 43
44.
Equilibrium is the Most Probable State N=100
Multiplicity Log Multiplicity
1.2E+29 35.00
30.00
1E+29
25.00
8E+28
No. of States
No. of States
20.00
6E+28
15.00
4E+28
10.00
2E+28
5.00
0 0.00
No in Left Box No in Left Box
MFMcGraw Chap15d-Thermo-Revised 5/5/10 44
45.
The Third Law of Thermodynamics
The third law of thermodynamics is a statistical law of nature
regarding entropy and the impossibility of reaching absolute
zero of temperature. The most common enunciation of third law
of thermodynamics is:
“ As a system approaches absolute zero, all processes cease and
the entropy of the system approaches a minimum value.”
It is impossible to cool a system to absolute zero by a
process consisting of a finite number of steps.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 45
46.
Heat Engine Operation
MFMcGraw Chap15d-Thermo-Revised 5/5/10 46
47.
Heat Engine Operation
MFMcGraw Chap15d-Thermo-Revised 5/5/10 47
48.
Carnot Cycle - Ideal Heat Engine
MFMcGraw Chap15d-Thermo-Revised 5/5/10 48
49.
Carnot Cycle - Ideal Heat Engine
Process efficiency
TL
ή = 1 - ---------
TH
No heat engine can run at 100% efficiency. Therefore TL
can never be zero. Hence absolute zero is unattainable.
MFMcGraw Chap15d-Thermo-Revised 5/5/10 49
50.
The British scientist and author C.P. Snow had an
excellent way of remembering the three laws:
1. You cannot win (that is, you cannot get something for
nothing, because matter and energy are conserved).
2. You cannot break even (you cannot return to the same
energy state, because there is always an increase in disorder;
entropy always increases).
3. You cannot get out of the game (because absolute zero is
unattainable).
MFMcGraw Chap15d-Thermo-Revised 5/5/10 50
51.
Summary
• The first law of thermodynamics
• Thermodynamic processes
• Thermodynamic processes for an ideal gas
• Reversible and irreversible processes
• Entropy - the second law of thermodynamics
• Statistical interpretation of entropy
• The third law of thermodynamics
MFMcGraw Chap15d-Thermo-Revised 5/5/10 51
52.
Extra
MFMcGraw Chap15d-Thermo-Revised 5/5/10 52
53.
Ensemble = mental collection of N systems
with identical macroscopic constraints, but
microscopic states of the systems are
different.
Microcanonical ensemble represents an
isolated system (no energy or particle
exchange with the environment).
MFMcGraw Chap15d-Thermo-Revised 5/5/10 53
+1-315-636-4485
+91 98151-74050 
