Contributed by:
Converging and diverging lenses, Image formation by a lens, The eye, Defects in vision
1.
30 Lenses
Lenses change the
paths of light.
2.
30 Lenses
A light ray bends as it
enters glass and bends
again as it leaves. Light
passing through glass of
a certain shape can form
an image that appears
larger, smaller, closer, or
farther than the object
being viewed.
3.
30 Lenses
30.1 Converging and Diverging Lenses
A lens forms an image by bending parallel rays of
light that pass through it.
4.
30 Lenses
30.1 Converging and Diverging Lenses
A lens is a piece of glass or plastic that refracts light.
A lens forms an image by bending parallel rays of light that
pass through it.
5.
30 Lenses
30.1 Converging and Diverging Lenses
Shapes of Lenses
The shape of a lens can be understood by considering a lens
to be a large number of portions of prisms.
a.The incoming parallel rays converge to a single point.
6.
30 Lenses
30.1 Converging and Diverging Lenses
Shapes of Lenses
The shape of a lens can be understood by considering a lens
to be a large number of portions of prisms.
a.The incoming parallel rays converge to a single point.
b.The incoming rays diverge from a single point.
7.
30 Lenses
30.1 Converging and Diverging Lenses
The most net bending of rays occurs at the outermost
prisms, for they have the greatest angle between the
two refracting surfaces.
No net bending occurs in the middle “prism,” for its
glass faces are parallel and rays emerge in their
original direction.
8.
30 Lenses
30.1 Converging and Diverging Lenses
Real lenses are made not of prisms, but of solid pieces of
glass or plastic with surfaces that are usually ground to a
spherical shape.
• A converging lens, also known as a convex lens, is
thicker in the middle, causing rays of light that are
initially parallel to meet at a single point.
• A diverging lens, also known as a concave lens, is
thinner in the middle, causing the rays of light to
appear to originate from a single point.
9.
30 Lenses
30.1 Converging and Diverging Lenses
Key Features of Lenses
The principal axis of a lens is the line joining the centers of
curvature of its surfaces.
For a converging lens, the focal point is the point at which a
beam of light parallel to the principal axis converges.
The focal plane is a plane perpendicular to the principal axis
that passes through either focal point of a lens.
10.
30 Lenses
30.1 Converging and Diverging Lenses
For a converging lens, any incident parallel beam
converges to a point on the focal plane.
A lens has two focal points and two focal planes.
When the lens of a camera is set for distant objects, the
film is in the focal plane behind the lens in the camera.
11.
30 Lenses
30.1 Converging and Diverging Lenses
The key features of a converging lens include the principal
axis, focal point, and focal plane.
12.
30 Lenses
30.1 Converging and Diverging Lenses
For a diverging lens, an incident beam of light parallel to
the principal axis is diverged so that the light appears to
originate from a single point.
The focal length of a lens, whether converging or
diverging, is the distance between the center of the lens
and its focal point.
When the lens is thin, the focal lengths on either side are
equal, even when the curvatures on the two sides are not.
13.
30 Lenses
30.1 Converging and Diverging Lenses
How does a lens form an image?
14.
30 Lenses
30.2 Image Formation by a Lens
The type of image formed by a lens depends
on the shape of the lens and the position of
the object.
15.
30 Lenses
30.2 Image Formation by a Lens
a. A distant object is viewed through a narrow angle.
16.
30 Lenses
30.2 Image Formation by a Lens
a. A distant object is viewed through a narrow angle.
b. When the same object is viewed through a wide angle,
more detail is seen.
17.
30 Lenses
30.2 Image Formation by a Lens
Images Formed by Converging Lenses
When you use a magnifying glass, you hold it close to the
object you wish to see magnified.
A converging lens will magnify only when the object is between
the focal point and the lens.
The magnified image will be farther from the lens than the
object and right-side up.
18.
30 Lenses
30.2 Image Formation by a Lens
If a screen were placed at the image distance, no
image would appear on the screen because no light
is actually directed to the image position.
The rays that reach your eye, however, behave as if
they came from the image position, so the image is
a virtual image.
19.
30 Lenses
30.2 Image Formation by a Lens
A converging lens can be used as a magnifying glass to
produce a virtual image of a nearby object.
20.
30 Lenses
30.2 Image Formation by a Lens
When the object is beyond the focal point of a converging lens, light
converges and can be focused on a screen.
An image formed by converging light is called a real image.
A real image formed by a single converging lens is upside down.
Converging lenses are used for projecting pictures on a screen.
21.
30 Lenses
30.2 Image Formation by a Lens
Images Formed by Diverging Lenses
When a diverging lens is
used alone, the image is
always virtual, right-side up,
and smaller than the object.
It makes no difference how
far or how near the object is.
A diverging lens is often
used for the viewfinder on a
camera.
22.
30 Lenses
30.2 Image Formation by a Lens
think!
Why is the greater part of the
photograph out of focus?
23.
30 Lenses
30.2 Image Formation by a Lens
think!
Why is the greater part of the
photograph out of focus?
Answer:
Both Jamie and his cat and the virtual image of Jamie and
his cat are “objects” for the lens of the camera that took this
photograph. Since the objects are at different distances
from the camera lens, their respective images are at
different distances with respect to the film in the camera. So
only one can be brought into focus.
24.
30 Lenses
30.2 Image Formation by a Lens
What determines the type of image
formed by a lens?
25.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
The size and location of the object, its
distance from the center of the lens, and the
focal length of the lens are used to construct
a ray diagram.
26.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
Ray diagrams show the principal rays that can be used
to determine the size and location of an image.
The size and location of the object, distance from the
center of the lens, and the focal length are used to
construct the ray diagram.
27.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
An arrow is used to represent the object.
For simplicity, one end of the object is placed right on the
principal axis.
28.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
The Three Principal Rays
To locate the position of the image, you only have to know the
paths of two rays from a point on the object.
Any point except for the point on the principal axis will work,
but it is customary to choose a point at the tip of the arrow.
29.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
• A ray parallel to the principal axis will be refracted by the
lens to the focal point.
30.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
• A ray parallel to the principal axis will be refracted by the
lens to the focal point.
• A ray will pass through the center with no appreciable
change in direction.
31.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
• A ray parallel to the principal axis will be refracted by the
lens to the focal point.
• A ray will pass through the center with no appreciable
change in direction.
• A ray that passes through the focal point in front of the lens
emerges from the lens parallel to the principal axis.
32.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
The image is located where the three rays intersect. Any
two of these three rays is sufficient to locate the relative
size and location of the image.
33.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
If the distance from the lens to the object is less than the
focal length, the rays diverge as they leave the lens.
The rays of light appear to come from a point in front of
the lens.
The location of the image is found by extending the rays
backward to the point where they converge.
34.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
The virtual image that is formed is magnified and
right-side up.
35.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
The three rays useful for the construction
of a ray diagram are:
1.A ray parallel to the principal axis
that passes through the focal point
on the opposite side.
2.A ray passing through the center of
the lens that is undeflected.
3.A ray through the focal point in front
of the lens that emerges parallel to
the principal axis after refraction by
the lens.
36.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
Ray Diagrams for Converging and Diverging Lenses
For a converging lens, as an
object, initially at the focal
point, is moved away from the
lens along the principal axis,
the image size and distance
from the lens changes.
For a converging lens, if the
object is not located between
the focal point and the lens,
the images that are formed
are real and inverted.
37.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
The method of drawing ray diagrams applies to diverging
lenses.
• A ray parallel to the principal axis from the tip of the
arrow will be bent by the lens as if it had come from
the focal point.
• A ray through the center goes straight through.
• A ray heading for the focal point on the far side of
the lens is bent so that it emerges parallel to the axis
of the lens.
38.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
On emerging from the lens, the three rays appear to come
from a point on the same side of the lens as the object.
This is the position of the virtual image. The image is
nearer to the lens than the object.
The image formed by a diverging lens is always virtual,
reduced, and right-side up.
39.
30 Lenses
30.3 Constructing Images Through Ray Diagrams
What information is used to construct a
ray diagram?
40.
30 Lenses
30.4 Image Formation Summarized
A converging lens forms either a real or a
virtual image. A diverging lens always forms a
virtual image.
41.
30 Lenses
30.4 Image Formation Summarized
When the object is viewed with a diverging lens, the image
is virtual, reduced, and right-side up.
This is true for all locations of the object.
In all cases where a virtual image is formed, the object and
the image are on the same side of the lens.
42.
30 Lenses
30.4 Image Formation Summarized
think!
Where must an object be located so that the image formed
by a converging lens will be (a) at infinity? (b) as near the
object as possible? (c) right-side up? (d) the same size? (e)
inverted and enlarged?
43.
30 Lenses
30.4 Image Formation Summarized
think!
Where must an object be located so that the image formed
by a converging lens will be (a) at infinity? (b) as near the
object as possible? (c) right-side up? (d) the same size? (e)
inverted and enlarged?
Answer:
The object should be (a) at one focal length from the lens
(at the focal point); (b) and (c) within one focal length of the
lens; (d) at two focal lengths from the lens; (e) between one
and two focal lengths from the lens.
44.
30 Lenses
30.4 Image Formation Summarized
What types of images are
produced by lenses?
45.
30 Lenses
30.5 Some Common Optical Instruments
Optical instruments that use lenses include
the camera, the telescope (and binoculars),
and the compound microscope.
46.
30 Lenses
30.5 Some Common Optical Instruments
The first eyeglasses were probably invented in Italy in the
late 1200s.
The telescope wasn’t invented until some 300 years later.
Today, lenses are used in many optical instruments.
47.
30 Lenses
30.5 Some Common Optical Instruments
Camera
A camera consists of a lens
and sensitive film (or light-
detecting chip) mounted in
a light-tight box.
The lens forms a real,
inverted image on the film
or chip.
In practice, most cameras
use compound lenses to
minimize distortions called
aberrations.
48.
30 Lenses
30.5 Some Common Optical Instruments
The amount of light that gets to the film is regulated by a
shutter and a diaphragm.
The shutter controls the length of time that the film is
exposed to light.
The diaphragm controls the opening that light passes
through to reach the film.
Varying the size of the opening (aperture) varies the amount
of light that reaches the film at any instant.
49.
30 Lenses
30.5 Some Common Optical Instruments
Telescope
A simple telescope uses a lens that forms a real
image of a distant object.
The real image is projected in space to be
examined by another lens, called the eyepiece,
used as a magnifying glass.
The eyepiece is positioned so that the image
produced by the first lens is within one focal
length of the eyepiece.
The eyepiece forms an enlarged virtual image of
the real image.
50.
30 Lenses
30.5 Some Common Optical Instruments
(The image is shown close here; it is actually located at infinity.)
In an astronomical telescope, the image is inverted, which explains why
maps of the moon are printed with the moon upside down.
A third lens or a pair of reflecting prisms is used in the terrestrial telescope,
which produces an image that is right-side up.
51.
30 Lenses
30.5 Some Common Optical Instruments
A pair of these telescopes
side by side, each with a
pair of prisms, makes up a
pair of binoculars.
Each side of a pair of
binoculars uses a pair of
prisms that flips the image
right-side up.
52.
30 Lenses
30.5 Some Common Optical Instruments
No lens transmits 100% of the light so
astronomers prefer the brighter, inverted images
of a two-lens telescope.
For uses such as viewing distant landscapes or
sporting events, right-side-up images are more
important than brightness.
53.
30 Lenses
30.5 Some Common Optical Instruments
Compound Microscope
A compound microscope uses two converging lenses of short focal length.
The objective lens produces a real image of a close object.
The image is farther from the lens than the object so it is enlarged.
The eyepiece forms a virtual image of the first image, further enlarged.
54.
30 Lenses
30.5 Some Common Optical Instruments
What are some optical instruments
that use lenses?
55.
30 Lenses
30.6 The Eye
The main parts of the eye are the cornea, the
iris, the pupil, and the retina.
56.
30 Lenses
30.6 The Eye
In many respects, the human eye is similar to the camera.
• Light enters through the transparent covering, the cornea.
• The amount of light that enters is regulated by the iris, the colored part of
the eye that surrounds the pupil.
• The pupil is the opening through which light passes.
• Light passes through the pupil and lens and is focused on a layer of tissue
at the back of the eye—the retina. Different parts of the retina receive light
from different directions.
57.
30 Lenses
30.6 The Eye
The Blind Spot
The retina is not uniform. There is a small region in the center
of our field of view where we have the most distinct vision.
This spot is called the fovea. Much greater detail can be seen
here than at the side parts of the eye.
There is also a spot in the retina where the nerves carrying all
the information leave the eye in a narrow bundle.
This is the blind spot.
58.
30 Lenses
30.6 The Eye
The Camera and the Eye
In both the camera and the eye, the image is upside down,
and this is compensated for in both cases.
You simply turn the camera film around to look at it.
Your brain has learned to turn around images it receives from
your retina.
59.
30 Lenses
30.6 The Eye
A principal difference between a camera and the human eye has to do with
focusing.
• In a camera, focusing is accomplished by altering the distance between the
lens and the film or chip.
• In the human eye, most of the focusing is done by the cornea, the
transparent membrane at the outside of the eye.
• The image is focused on the retina by changing the thickness and shape of
the lens to regulate its focal length. This is called accommodation and is
brought about by the action of the ciliary muscle, which surrounds the lens.
60.
30 Lenses
30.6 The Eye
61.
30 Lenses
30.6 The Eye
What are the main parts
of the human eye?
62.
30 Lenses
30.7 Some Defects in Vision
Three common vision problems are farsightedness,
nearsightedness, and astigmatism.
63.
30 Lenses
30.7 Some Defects in Vision
With normal vision, your eye can accommodate to
clearly see objects from infinity (the far point) down
to 25 cm (the near point).
Unfortunately, not everyone has normal vision.
64.
30 Lenses
30.7 Some Defects in Vision
Farsightedness
A farsighted person has trouble focusing on nearby objects.
• The eyeball is too short and images form behind the retina.
• Farsighted people have to hold things more than 25 cm away to be
able to focus them.
• The remedy is to increase the converging effect of the eye by
wearing eyeglasses or contact lenses with converging lenses.
• Converging lenses converge the rays sufficiently to focus them on
the retina instead of behind the retina.
65.
30 Lenses
30.7 Some Defects in Vision
Nearsightedness
A nearsighted person can see nearby objects clearly, but does not see
distant objects clearly.
• Distant objects focus too near the lens, in front of the retina.
• The eyeball is too long.
• A remedy is to wear lenses that diverge the rays from distant
objects so that they focus on the retina instead of in front of it.
66.
30 Lenses
30.7 Some Defects in Vision
Astigmatism
Astigmatism of the eye is a defect that results when the
cornea is curved more in one direction than the other.
Because of this defect, the eye does not form sharp images.
The remedy is cylindrical corrective lenses that have more
curvature in one direction than in another.
67.
30 Lenses
30.7 Some Defects in Vision
What are three common
vision problems?
68.
30 Lenses
30.8 Some Defects of Lenses
Two types of aberration are spherical aberration and
chromatic aberration.
69.
30 Lenses
30.8 Some Defects of Lenses
No lens gives a perfect image.
The distortions in an image are called aberrations.
Combining lenses in certain ways can minimize
aberrations so most optical instruments use
compound lenses.
70.
30 Lenses
30.8 Some Defects of Lenses
Aberrations
Spherical aberration results when light passing through the
edges of a lens focuses at a slightly different place from light
passing through the center of the lens.
Spherical aberration is corrected in good optical instruments
by a combination of lenses.
71.
30 Lenses
30.8 Some Defects of Lenses
Chromatic aberration is the result of the different speeds of light of various
colors, and hence the different refractions they undergo.
In a simple lens red light and blue light bend by different amounts (as in a
prism), so they do not come to focus in the same place.
Achromatic lenses, which combine simple lenses of different kinds of glass,
correct this defect.
72.
30 Lenses
30.8 Some Defects of Lenses
Vision is sharpest when the pupil is smallest.
Light then passes through only the center of the eye’s lens,
where spherical and chromatic aberrations are minimal.
Also, light bends the least through the center of a lens, so
minimal focusing is required for a sharp image.
You see better in bright light because your pupils are smaller.
73.
30 Lenses
30.8 Some Defects of Lenses
Methods for Correcting Vision
An alternative to wearing eyeglasses for correcting vision is
contact lenses.
One option is LASIK (laser-assisted in-situ keratomileusis), the
procedure of reshaping the cornea using pulses from a laser.
Another procedure is PRK (photorefractive keratectomy). Still
another is IntraLase, where intraocular lenses are implanted in
the eye like a contact lens.
74.
30 Lenses
30.8 Some Defects of Lenses
think!
Why is there chromatic aberration in light that passes
through a lens, but no chromatic aberration in light that
reflects from a mirror?
75.
30 Lenses
30.8 Some Defects of Lenses
think!
Why is there chromatic aberration in light that passes
through a lens, but no chromatic aberration in light that
reflects from a mirror?
Answer:
Different frequencies travel at different speeds in a
transparent medium, and therefore refract at different
angles. This produces chromatic aberration. The angles at
which light reflects, on the other hand, have nothing to do
with the frequency of light. One color reflects the same as
any other.
76.
30 Lenses
30.8 Some Defects of Lenses
What types of aberrations can
occur in images?
77.
30 Lenses
Assessment Questions
1. The action of lenses depends mainly on
a. convexing light in various directions.
b. changing the direction of light rays or waves.
c. converging light rays or waves.
d. diverging light rays or waves.
78.
30 Lenses
Assessment Questions
1. The action of lenses depends mainly on
a. convexing light in various directions.
b. changing the direction of light rays or waves.
c. converging light rays or waves.
d. diverging light rays or waves.
Answer: B
79.
30 Lenses
Assessment Questions
2. A real image can be cast on a screen by
a. converging lens.
b. diverging lens.
c. concave lens.
d. any lens.
80.
30 Lenses
Assessment Questions
2. A real image can be cast on a screen by
a. converging lens.
b. diverging lens.
c. concave lens.
d. any lens.
Answer: A
81.
30 Lenses
Assessment Questions
3. The minimum number of light rays necessary to construct the position
of an image is
a. one.
b. two.
c. three.
d. four.
82.
30 Lenses
Assessment Questions
3. The minimum number of light rays necessary to construct the position
of an image is
a. one.
b. two.
c. three.
d. four.
Answer: B
83.
30 Lenses
Assessment Questions
4. A diverging lens forms
a. only a real image.
b. only a virtual image.
c. both a real image and a virtual image.
d. a perfect image.
84.
30 Lenses
Assessment Questions
4. A diverging lens forms
a. only a real image.
b. only a virtual image.
c. both a real image and a virtual image.
d. a perfect image.
Answer: B
85.
30 Lenses
Assessment Questions
5. The amount of light getting into a camera or your eye is
regulated by a(n)
a. distorter.
b. diaphragm.
c. eyepiece.
d. set of compound lenses.
86.
30 Lenses
Assessment Questions
5. The amount of light getting into a camera or your eye is
regulated by a(n)
a. distorter.
b. diaphragm.
c. eyepiece.
d. set of compound lenses.
Answer: B
87.
30 Lenses
Assessment Questions
6. To best test for the blind spots in your eyes,
a. keep your eyes wide open in bright light.
b. close one eye.
c. do not use eyeglasses unless you need them.
d. focus intently on whatever you’re viewing.
88.
30 Lenses
Assessment Questions
6. To best test for the blind spots in your eyes,
a. keep your eyes wide open in bright light.
b. close one eye.
c. do not use eyeglasses unless you need them.
d. focus intently on whatever you’re viewing.
Answer: B
89.
30 Lenses
Assessment Questions
7. A person who is nearsighted wears
a. no glasses.
b. glasses that have a uniform thickness.
c. glasses that are thicker in the middle.
d. glasses that are thicker at the edges.
90.
30 Lenses
Assessment Questions
7. A person who is nearsighted wears
a. no glasses.
b. glasses that have a uniform thickness.
c. glasses that are thicker in the middle.
d. glasses that are thicker at the edges.
Answer: D
91.
30 Lenses
Assessment Questions
8. Chromatic aberrations are caused by
a. light passing through a lens.
b. the use of achromatic lenses.
c. different colors of light traveling at different speeds.
d. LASIK.
92.
30 Lenses
Assessment Questions
8. Chromatic aberrations are caused by
a. light passing through a lens.
b. the use of achromatic lenses.
c. different colors of light traveling at different speeds.
d. LASIK.
Answer: C
+1-315-636-4485
+91 98151-74050 
