Workshop Technology

This is an MCQ-based quiz on the topic of Workshop Technology.

This includes the Basic manufacturing system, Causes of Workshop Accidents, Accidents & Safety, What is the purpose of general safety rules? Personal Protective Equipment (PPE), and many more.

Start Quiz

Acetylene gas is stored in cylinders in

Solid form Gaseous form Liquid form Any one of these

Loam sand is a mixture of

30% sand and 70% clay 50% sand and 50% clay 70% sand and 30% clay 90% sand and 10% clay

Green sand is a mixture of

30% sand and 70% clay 50% sand and 50% clay 70% sand and 30% clay 90% sand and 10% clay

The blank diameter used in thread rolling will be

Equal to minor diameter of the thread Equal to pitch diameter of the thread A little larger than the minor diameter of the thread A little larger than the pitch diameter of the thread

The operation of cutting of a flat sheet to the desired shape is called

Shearing Piercing Punching Blanking

The brass and bronze are welded by _________ flame.

Neutral Oxidizing Carburising All of these

For obtaining a cup of diameter 25 mm and height 15 mm by drawing, the size of the round blank should be approximately

42 mm 44 mm 46 mm 48 mm

In sheet metal blanking, shear is provided on punches and dies so that

Press load is reduced Good cut edge is obtained Warping of sheet is minimized Cut blanks is straight

In TIG arc welding, the welding zone is shielded by an atmosphere of

Helium gas Argon gas Either (A) or (B) None of these

A gimlet is a ________ tool.

Boring Marking Cutting None of these

Quiz/Test Summary

Title: Workshop Technology

Questions: 10

Contributed by:

NEO Mon, Mar 14, 2022 01:14 PM UTC

Book a Trial Class