+1-315-636-4485
+91 98151-74050 
This quiz contains multiple-choice problems on computer-aided drawing, riveted and welded joints.
The commands Donut, Block, Spline, Polygon, Arc, etc. belong to which toolbar?
Layer tool bar
Style tool bar
Modify tool bar
Draw tool bar
The commands Erase, Copy, Mirror, Trim, Extend, Break, etc. belong to which toolbar?
Layer tool bar
Style tool bar
Modify tool bar
Draw tool bar
The command which works on two lines or a single polyline to create a bevelled edge is
Chamfer
Fillet
Stretch
Extend
The command which is used to create a round corner between two lines is
Chamfer
Fillet
Stretch
Extend
The command ‘Oops’ is used to
Create one or more copies of selected objects at another location
Creates mirror image of selected objects about specified line
Retrieves all objects erased by the last erase
Deletes the selected entities
The command ‘pedit’ is used for
Erases a portion of line, arc, circle or a 2D poly line between two selected points
Reverses the effects of a series of previously used commands
Breaking a poly line into individual segments
Editing of poly line properties
The command ‘break’ is used for
Erases a portion of line, arc, circle or a 2D poly line between two selected points
Reverses the effects of a series of previously used commands
Breaking a poly line into individual segments
Editing of poly line properties
The command ‘U’ is used for
Erases a portion of line, arc, circle or a 2D poly line between two selected points
Reverses the effects of a series of previously used commands
Breaking a poly line into individual segments
Editing of poly line properties
The command ‘Explode’ is used for
Erases a portion of line, arc, circle or a 2D poly line between two selected points
Reverses the effects of a series of previously used commands
Breaking a poly line into individual segments
Editing of poly line properties
The command used to set a new coordinate system by shifting the working XY plane to be the desired location is
3DFACE
VPOINT
UCS
ELEV
The command used for making planar unmeshed surfaces that have three or four sides is
3DFACE
VPOINT
UCS
ELEV
The command used to set the viewpoint in 3D space for viewing the 3D models is
3DFACE
VPOINT
UCS
ELEV
The command used to set elevation and thickness properties for 2D wireframe objects such as line, point, circle, polygon, arc, etc. is
3DFACE
VPOINT
UCS
ELEV
The command which identifies the points on drawing entities that are visible on screen is __ and this option allows the user to pick up the points very accurately with respect to the drawing displayed.
OSNAP
TABSURF
SNAP
GRID
